Why is my roller door not stopping at the correct position?

There could be several reasons why your roller door is not stopping at the correct position. 

1. Limit Switch: One possibility is that the limit switch needs to be adjusted. This switch tells the motor when to stop moving the door up or down. If it is not set correctly, the roller door may stop too early or too late.

2. Faulty Motor: Another possibility is that there is a problem with the motor itself. It could be that the motor is failing to detect the limit switch or that it is not receiving the correct signals from the control unit. In this case, you may need to have the motor or control unit repaired or replaced.

3. Obstruction: It is also possible that there is an obstruction in the path of the door, causing it to stop prematurely. Check if any obstructions are blocking the path of the roller door.

If none of these solutions works, it is best to consult a qualified technician to diagnose and fix the problem.

For a complete guide on the operation and maintenance of your roller door, please refer to the Operation Manual on our website.

Please contact Scotty Doors on 0800 760 687 / 09 479 4779 or email us at office@scottydoors.com for further assistance.